Publications

Effects of Exit Fan Angle on the Heat Transfer Performance of Sweeping Jet Impingement

Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P.

AIAA Journal, 2021; 59(6):2113–2125. doi:10.2514/1.J059931

Conjugate Heat Transfer Study of Innovative Pin-Fin Cooling Configurations

Hossain, M.A., Ameri, A., Bons, J.P.

AIAA J. of Propulsion and Power, 2021; 37(4):604–614. doi:10.2514/1.B37980

Flow and Frequency Characterization of the Synchronized Stacked Sweeping Jets

Tomac, M.N., Hossain, M.A., Ameri, A., Bons, J.P.

AIAA Journal, 2021; 59(1):118–130. doi:10.2514/1.J059643

Experimental Investigation of Innovative Cooling Schemes on an Additively Manufactured Engine Scale Turbine Nozzle Guide Vane

Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P.

ASME J. Turbomach., 2021; 143(5):051004. doi:10.1115/1.4049618 14 pages

Sweeping Jet Film Cooling at High Blowing Ratio on a Turbine Vane

Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P.

ASME J. Turbomach., 2020; 142(12):121010. doi:10.1115/1.4047396

Experimental Investigation of Sweeping Jet Film Cooling in a Transonic Turbine Cascade

Hossain, M.A., Asar, M.E., Gregory, J., Bons, J.P.

ASME J. Turbomach., 2019; 142(4):041009. doi:10.1115/1.4046548

Sweeping Jet Film Cooling on a Turbine Vane

Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

ASME J. Turbomach., 2019; 141(3):031007. doi:10.1115/1.4042070

Sweeping Jet Impingement Cooling on a Simulated Turbine Vane Leading Edge

Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

J. Global Power and Propulsion Society, 2018; 2:402–414. doi:10.22261/JGPPS.5A7OAZ

Experimental and Numerical Investigation of Sweeping Jet Film Cooling

Hossain, M.A., Prenter, R., Lundgreen, R., Ameri, A., Gregory, J., Bons, J.P.

ASME J. of Turbomachinery, 2017; 140(3):031009. doi:10.1115/1.4038690

Design of a High Turbulence Intensity Combustion System

Hossain, M.A., Love, N.D., Choudhuri, A.

J. Mechanical Engineering Science, 2017. doi:10.1177/0954406218757565

Introduction of Two Novel Stiffness Parameters and Interpretation of Air Puff–Induced Biomechanical Deformation Parameters With a Dynamic Scheimpflug Analyzer

Roberts C, Mahmoud A, Bons J, Hossain A, Elsheikh A, Vinciguerra R, Vinciguerra P, Ambrósio R.

J. Refractive Surgery, 2017; 33:266–273. doi:10.3928/1081597X-20161221-03

Propagation of Shock on NREL Phase VI Wind Turbine Airfoil under Compressible Flow

Hossain, M.A., Huque, Z., Kammalapati, R.R.

J. Renewable Energy, 2013, Article ID 653103. doi:10.1155/2013/653103

Discrete Optimization of Wind Turbine Blade Airfoil

Hossain, M.A., Huque, Z., Kammalapati, R.R., Zemmouri, G.

Int. J. of Eng. Research and Technology, 2013; Vol 2(2), ISSN: 2278-0181

Numerical Investigation of Fluid Flow of a 2D Backward Facing Step Channel

Hossain, M.A., Rahman, M.T., Ridwan, S.

Int. J. of Eng. Research and Technology, 2013; Vol 2(10), ISSN: 2278-0181

Wind Turbine Blade Tip Comparison as a Function of Taper Using Computational Fluid Dynamics

Khan, S., Huque, Z., Hossain, M.A., Kammalapati, R.R.

Advances and Applications in Fluid Mechanics, 2013; Vol 14(2), ISSN: 0973-4686

Effect of Roughness on the Performance of Fluidic Oscillator

AIAA Journal (in preparation)

Large Eddy Simulation of a Sweeping Jet in a Crossflow

AIAA Journal (in preparation)

Experimental Investigation of Innovative Cooling Schemes on an Additively Manufactured Engine Scale Turbine Nozzle Guide Vane

Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P.

ASME Turbo Expo 2020 (Virtual). GT2020-15707

Conjugate Heat Transfer Study of Innovative Pin-Fin Cooling Configurations

Hossain, M.A., Asar, M.E., Ameri, A., Bons, J.P.

AIAA SciTech 2020, AIAA2020-0634

Experimental Investigation of Sweeping Jet Film Cooling in a Transonic Turbine Cascade

Hossain, M.A., Asar, M.E., Gregory, J., Bons, J.P.

ASME Turbo Expo 2019, Phoenix, AZ. GT2019-91678

Sweeping Jet Film Cooling at High Blowing Ratio on a Turbine Vane

Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P.

ASME Turbo Expo 2019, Phoenix, AZ. GT2019-91696

Effects of Rotation on a Fluidic Actuator

Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P.

AIAA SciTech 2019, AIAA 2019-0885. doi:10.2514/6.2019-0885

Effects of Exit Fan Angle on the Heat Transfer Performance of Sweeping Jet Impingement

Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

AIAA Propulsion and Energy Forum 2018, Cincinnati, OH. AIAA 2018-4886. doi:10.2514/6.2018-4886

Sweeping Jet Film Cooling on a Turbine Vane

Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

ASME Turbo Expo 2018, GT2018-77099. doi:10.1115/GT2018-77099

Turbine Vane Leading Edge Impingement Cooling with a Sweeping Jet

Agricola, L.M., Hossain, M.A., Ameri, A., Gregory, J., Bons, J.P.

ASME Turbo Expo 2018, GT2018-77073. doi:10.1115/GT2018-77073

Sweeping Jet Impingement Cooling on a Simulated Turbine Vane Leading Edge

Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

Global Power and Propulsion Conference 2018, Montreal, GPPS2018-0148. doi:10.5281/zenodo.1342688

Effects of Curvature on the Performance of Sweeping Jet Impingement Heat Transfer

Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

56th AIAA Aerospace Sciences Meeting, 2018, Florida. doi:10.2514/6.2018-0243

Impinging Sweeping Jet Heat Transfer

Agricola, L.M., Hossain, M.A., Prenter, R., Lundgreen, R.K., Ameri, A., Gregory, J., Bons, J.P.

53rd AIAA Joint Propulsion Conference, 2017, AIAA 2017-4974. doi:10.2514/6.2017-4974

Experimental and Numerical Investigation of Sweeping Jet Film Cooling

Hossain, M.A., Prenter, R., Lundgreen, R., Ameri, A., Gregory, J., Bons, J.P.

ASME Turbo Expo 2017, GT2017-64479. doi:10.1115/GT2017-64479

Experimental Characterization of Reverse-Oriented Film Cooling

Prenter, R., Hossain, M.A., Agricola, L.M., Ameri, A., Bons, J.P.

ASME Turbo Expo 2017, GT2017-64731. doi:10.1115/GT2017-64731

Effect of Roughness on the Performance of Fluidic Oscillator

Hossain, M.A., Prenter, R., Lundgreen, R.K., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

55th AIAA Aerospace Sciences Meeting, 2017, TX. AIAA 2017-0770. doi:10.2514/6.2017-0770

Investigation of Crossflow Interaction of an Oscillating Jet

Hossain, M.A., Prenter, R., Lundgreen, R.K., Agricola, L.M., Ameri, A., Gregory, J., Bons, J.P.

55th AIAA Aerospace Sciences Meeting, 2017, TX. AIAA 2017-1690. doi:10.2514/6.2017-1690

Impingement Heat Transfer Characteristics of Sweeping Jet

Lundgreen, R.K., Hossain, M.A., Prenter, R., Bons, J.P., Gregory, J., Ameri, A.

55th AIAA Aerospace Sciences Meeting, 2017, TX. AIAA 2017-1535. doi:10.2514/6.2017-1535

The Effect of Freestream Turbulence on Steady VGJ Flow Control on a Highly Loaded Transonic LPT Cascade

Sacco, C., Hossain, M.A., Bons, J.P.

AIAA Aviation 2016, Washington, DC. AIAA-2016-4089. doi:10.2514/6.2016-4089

A New Stiffness Parameter in Air Puff Induced Corneal Deformation Analysis

Roberts CJ, Mahmoud AM, Bons J, Hossain A, Elsheikh A, Vinciguerra R, Vinciguerra P, Ambrósio R.

Invest. Ophthalmology & Visual Science, ARVO 2016; 57: E-Abstract 2390.

Numerical Investigation of Perfectly Premixed Combustion and the Effect of NOx Emission for Syngas in a Gas Turbine Combustor

Hossain, S., Hossain, M.A.

ASME Power Conference 2015, San Diego, CA. POWER2015-49388. doi:10.1115/POWER2015-49388

Displacement Potential Solution of Stresses and Displacements in a Semicircular Curved Beam with Local Supports

Ghosh, A.K., Modak, P., Hossain M.A., Ahmed, S.R.

ASME Applied Mechanics and Materials Conference, Seattle, WA, June 2015.

Design of a High Turbulence Intensity Combustion System

Acosta, A., Hossain, M.A., Quiroz, M., Choudhuri, A.

50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cleveland, OH. doi:10.2514/6.2014-3874

Numeric Investigation of Fluid-Solid Interaction on Wind Turbine Blade

Hossain, M.A., Huque, Z., Kammalapati, R.R.

ASME IMECE 2013, IMECE2013-65647. doi:10.1115/IMECE2013-65647

Investigation and Improvement of Thermal Efficiency of Hypersonic Scramjet

Hossain, M.A., Rahaman, M.T., Hossain Soiket, M.I., Hossain, S.

ASME IMECE 2014, IMECE 2014-37385. doi:10.1115/IMECE2014-37385

Numerical Investigation of Porous Medium Heat Transfer

Hossain, M.A., Hossain, S.

ASME IMECE 2014, IMECE 2014-37387. doi:10.1115/IMECE2014-37387

Numeric Investigation of Fluid Solid Interaction and Performance Analysis of Pre-bent Wind Turbine Blade

Hossain, M.A., Hossain, S., Ridwan, S.

ASME IMECE 2014, IMECE 2014-37394. doi:10.1115/IMECE2014-37396

"Sweeping jet film cooling and Impingement cooling"

October 1, 2019 — Dow Chemical, Lake Jackson, TX, USA Invited

"Sweeping jet film cooling and Impingement cooling for heat transfer application"

March 14, 2019 — Boeing R&D, St. Louis, MO, USA Invited

"Sweeping jet film cooling and impingement cooling for gas turbine heat transfer application"

April 2019 — Ohio Supercomputer Center, Columbus, OH, USA Invited

"Sweeping jet film cooling for gas turbine application"

March 2019 — Aerospace Research Center, Columbus, OH, USA

Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering (DMLS)

Hossain, M.A., Asar, E., Ameri, A., Gregory, J., Bons, J.P.

DOE UTSR Workshop 2018, Daytona Beach, FL.

Design of Wind Turbine Blade Using New Optimized Aerodynamic Simulator

Hossain, M.A., Huque, Z., Kammalapati, R.R.

AWEA Wind Power Conference and Exhibition, May 2013.

Design of Wind Turbine Blade Airfoil by Optimized Aerodynamic Simulator

Hossain, M.A., Huque, Z., Kammalapati, R.R.

10th Annual Student Symposium, Texas A&M at Galveston, October 2012.

Design of a High Intensity Turbulent Combustion System

Acosta, A., Hossain, M.A., Quiroz, M.

Graduate Research Expo 2013, University of Texas at El Paso.

Sweeping Jet Film Cooling

Ph.D. Dissertation, The Ohio State University, 2020.

Design of a High Intensity Turbulent Combustion System

M.S. Thesis, University of Texas at El Paso, 2015.